STANDARD STAR TENSING SYSTEMS (INCLUDED BY DEFAULT)
Tighten process: The springs tighten the rope. These ones are tightened by screwing a nut.
Anchoring: They are fixed directly under the roof and on the floor.

GUIDE RAIL ADAPTERS FOR STANDARD STAR TENSING SYSTEMS
Anchoring: Assembled onto the guide with forged clips.

STAR TENSING SYSTEMS WITH WEIGHT (3 DIFFERENT TYPES)
Tighten process: The end of the rope is tightened with a weight.

1) STAR TENSING SYSTEM WITH WEIGHT (Standard type with weight by default)
• Upper standard tension device: Anchored under the roof.
• Bottom tension device: Assembled onto the guide with forged clips.

2) STAR TENSING SYSTEM WITH WEIGHT (UPPER PART ANCHORED TO THE GUIDE R.)
• Upper standard tension device: Anchored to the guide rail with a special fitting device.
• Bottom tension device: Assembled onto the guide with forged clips.

3) STAR TENSING SYSTEM WITH WEIGHT (BOTTOM PART ANCHORED ON THE FLOOR)
• Upper standard tension device: Anchored under the roof as the old type.
• Bottom tension device: Anchored on the floor.