Dynatech Elevation
Instantaneous Safety Gears
SINGLE ACTING progressive safety gears
BI-DIRECTIONAL progressive safety gears
Safety Gear for large loads: TANDEM Configuration
Electromechanical safety gears
Extensible Acting bars
RENO support system for new or existing frames
Overspeed Governors QUASAR
Overspeed Governors STAR
Overspeed Governors LBD
Overspeed Governors VEGA
Tension Weights
Compact Tensing Pulleys
Electronic devices
U.C.M.
QUASAR SV
Overspeed governor QUASAR SV

The QUASAR SV overspeed governor is one of the three models in the QUASAR governors' range. This is an on board overspeed governor with a 120mm-diametre pulley, very similar to our STAR overspeed governor but much more adjustable than it, according to the room available in the frame, given its smaller size.


Acting: BI-DIRECTIONAL or SINGLE-ACTING

Maximum rated speed: 2,18 m/s
Minimum rated speed: 0,1 m/s

Tripping speed:
  • BI-DIRECTIONAL or SINGLE-ACTING:
    Minimum: 0,7 m/s
    Maximum: 2,63 m/s
     
  • ONLY SINGLE-ACTING (QUASAR SV LS):
    Minimum: 0,30 m/s
    Maximum: 0,69 m/s
     
Pulley Diameter: 120 mm
Rope Diameter: 4 mm
Overspeed contact included
Rope out protection included
Rope slackening contacts included
 
  • ​(Optional) Remote tripping mechanism by electrical acting: 24, 48 or 190 VDC
 
  • (Optional) Anticreep device for UCM by electrical acting: 24, 48 or 190 VDC + Control sensor (Included). When using the SD-BOX electronic device for UCM with Anticreep system, COIL should be 24Vdc


230 VAC - 190 VDC Rectifier (optional)

According to the standards: 
EN 81-20 and EN 81-50.
Operating and maintenance instructions

See video: Examples of use of our products (2D)
Dynatech
Poligono Ind. de Pina de Ebro. Sector C.p-9. 50750 Pina de Ebro. Zaragoza-España(Spain)
© 2005 -2021 Dynatech Legal Aspects