Dynatech Elevation
STAR TENSING SYSTEM
STAR TENSING SYSTEM

STANDARD STAR TENSING SYSTEMS (INCLUDED BY DEFAULT)
Tighten process: The springs tighten the rope. These ones are tightened by screwing a nut.
Anchoring: They are fixed directly under the roof and on the floor.

GUIDE RAIL ADAPTERS FOR STANDARD STAR TENSING SYSTEMS
Anchoring: Assembled onto the guide with forged clips.

STAR TENSING SYSTEMS WITH WEIGHT (3 DIFFERENT TYPES)
Tighten process:
The end of the rope is tightened with a weight.

1) STAR TENSING SYSTEM WITH WEIGHT (Standard type with weight by default)
Upper standard tension device: Anchored under the roof.
Bottom tension device: Assembled onto the guide with forged clips.

2) STAR TENSING SYSTEM WITH WEIGHT (UPPER PART ANCHORED TO THE GUIDE R.)
Upper standard tension device: Anchored to the guide rail with a special fitting device.
Bottom tension device: Assembled onto the guide with forged clips.

3) STAR TENSING SYSTEM WITH WEIGHT (BOTTOM PART ANCHORED ON THE FLOOR)
Upper standard tension device: Anchored under the roof as the old type.
Bottom tension device: Anchored on the floor.
Operating and maintenance instructions
Dynatech
Poligono Ind. de Pina de Ebro. Sector C.p-9. 50750 Pina de Ebro. Zaragoza-España(Spain)
© 2005 -2019 Dynatech Legal Aspects