Dynatech Elevation
COMPACT TENSING PULLEY 126
TENSING PULLEY COMPACT 126

COMPACT 126 tension weight is a product designed to provide the tension required for the rope going through a standard overspeed governor QUASAR’s groove. Unlike the usual tensioning pulleys, which use masses to generate tension, these masses have been removed from our COMPACT pulleys replacing them with springs.

This is a very compact design, with minimum dimensions, perfect to be used in installations with a reduced headroom and pit.

DYNATECH’s COMPACT 126 tension weigh which is used with the 6 / 6.5 mm, is a product that is supplied pre-assembled. Sheave diameter: 120 mm

This allows the installer to save time when assembling it in the installation. It is supplied by default with:
  • Rope slackening contact.
  • Rope tensioner: That will make rope re-tensioning easier if required.
  • Steel pulley.
  • Rope out protection system.

Operating and maintenance instructions
Dynatech
Poligono Ind. de Pina de Ebro. Sector C.p-9. 50750 Pina de Ebro. Zaragoza-España(Spain)
© 2005 -2021 Dynatech Legal Aspects